Page 1 of 1

Error in routine AirEffect.ProgramForces???

Posted: Thu Jun 22, 2017 11:44 am
by joebelter
Hi! I'm using Prepar3d v3.4 (latest hotfix) and FSUIPC ver 4(last version before v5).
I am trying to use my Sidewinder II joystick and keep getting the directx error. I made sure the trim commands in Prepar3d control panel were gone and that FSUIPC doesn't have ANY trim commands in it at all.
Please help!
Here's from the log file:
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.Error in routine AirEffect.ProgramForces (1) :

DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine MechanicalEffects.UpdateForces1 :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine MechanicalEffects.UpdateForces1 :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
---------------------------------------------------------------------------
Profile Manager [2017-06-21 21:11:39]
---------------------------------------------------------------------------
Error in routine Joystick Init (4) : E_NOTIMPL - The function called is not supported at this time
Error in routine Joystick Init (4) : E_NOTIMPL - The function called is not supported at this time
FS Force closing.
FS Force closing.
---------------------------------------------------------------------------
FSForce.exe SimConnect Client : Acceleration [2017-06-22 04:14:58 UTC]
---------------------------------------------------------------------------
[1] FSForce.DLL [2017-06-22 04:14:59 UTC]
[2] Application name : Lockheed MartinĀ® Prepar3DĀ® v3
Application version : 3.4.22.19868
[2] SimConnect Version : 3.4.0.0
Interface Version : 19
[2] Launching HV module
-----------------------------------------------------------
Activation Helper - VerifyHardware [2017-06-21 21:15:01]
Application Version : 2.11.0.0457
Download Version : 4
-----------------------------------------------------------
UTC : 2017-06-22 04:15:01
OHL4YNC7jKLuiEhPaRBRU0AinUQzt1TY
x+cbfAxF5NBaMmoqcwuw8LfEGEvOBD6A
C+G7+Fq6vH/Dn72LvCAGzg==
RQfXJkVtfQeKrXrwhIlNsXiBDhatD2gaum7nSvqNaDuTwNUkifKuII7jw/pflx9A
spt0WWdFGSzfpTjPCGc6vPgiETeA7a5i59IcaDoFajDonJOMeuqLP7LaJjb8n6zBcXzEclByniVBJaeKaR+3z4zcOQfuAqMx
b7M/0sisID8CY1uMPeNB/LL+J5DYi9ghtJL18N1C+Q0=
jC9nIwb9wbsSNqtgnhNir5YeEf+WFZnT
Hardware Verification Succeeded.
6/21/2017 9:15:04 PM : Jcm/EueZ1y62O+gfMJMpBg==
FSF_HDW_VERIFY received by EXE. Result=-1
Error in routine AirEffect.Load[1] :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.Load[2] : :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine MechanicalEffects.Init[1] :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine MechanicalEffects.Init[2] :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine LandingBump.Init1 :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine LandingBump.Init2 :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine LandingBump.Init3 :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine MechanicalEffects.UpdateForces1 :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine MechanicalEffects.UpdateForces1 :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.
EXE : requesting DLL to restart .exe
FS Force closing.
Error in routine AirEffect.ProgramForces (1) :
DIERR_NOTEXCLUSIVEACQUIRED & VFW_E_FILTER_ACTIVE & DMO_E_TYPE_NOT_ACCEPTED : The operation cannot be performed unless the device is acquired in DISCL_EXCLUSIVE mode. & This operation cannot be performed because the filter is active.

Re: Error in routine AirEffect.ProgramForces???

Posted: Thu Jun 22, 2017 11:36 pm
by RussDirks
Those type of errors generally indicate a faulty joystick. What is the history of your joystick? Have you used it successfully with any other FS sim? Try downloading my ForceTest program from the support page and test out the various functions to make sure it is working fully.

Also, please post the contents of your C:\ProgramData\FS Force\FSForce.cfg file.

Re: Error in routine AirEffect.ProgramForces???

Posted: Fri Jun 23, 2017 5:26 am
by joebelter
The joystick works flawlessly with the DCS simulator games. I don't get it...
Here's the config info, I didn't post the whole thing as the rest of it was just other profile data I don't use.
Joe

[General]
TrimClickAmount=100
TrimIndicator=1
PauseOnTaskSwitch=0
dwStartDelay=1
PMWndPos=694,235
DemoAreaInfo=1
TrimWheel=Rev1:Axis:SideWinder Force Feedback 2 Joystick:{3E503F90-55A9-11E7-8001-444553540000}:XAxis:X Axis
Brakes=Rev1:Button:SideWinder Force Feedback 2 Joystick:{3E503F90-55A9-11E7-8001-444553540000}:3
Restart=Rev1:Button:Throttle - HOTAS Warthog:{3D494030-5C3D-11E6-8002-444553540000}:20

[Profile Assignments]
A2A North American T-6 Texan=
Airbus A320-214 CFM=
Airbus A320-232 IAE=
Airbus A321-211 CFM=
Airbus A321-231 IAE=
North American Rockwell OV-10B Bronco=
North American Rockwell OV-10A Bronco=
Airbus A321=Jet Heavy
Alabeo Extra 300s=
Beechcraft C99=
Beechcraft Baron 58=Medium GA
Beechcraft King Air 350=Twin Turboprop
Boeing T-45C Goshawk=
ACME Regional Jet=
Lockheed C-130J=
Carenado A36 Bonanza=
Carenado C337=
ACME Commercial Jet=
ACME Single Engine Prop Seaplane=
de Havilland DHC6 Twin Otter=
ACME Twin Engine Turboprop=
Grumman F14=
Boeing F15=
Lockheed Martin F-16=
Lockheed Martin F-35A Lightning II=
Lockheed Martin=
ACME Twin Engine Prop=
IRIS Flight Simulation Software Pilatus PC-9/A=
Lockheed Martin F-22 Raptor=
Beechcraft T-6A Texan II NTA SP2=
Beechcraft T-6A Texan II SP2=
Lockheed P-38F Lightning=
Lockheed P-38F-4 Lightning=
Lockheed P-38J-15LO Lightning=
Lockheed P-38J-F-5 Lightning=
Lockheed C69/049A "Constellation"=
Lockheed L049A "Constellation"=
Korea Aerospace Industries T-50 Golden Eagle=
ACME Twin Engine Jet=
Maule Orion=Light GA
Maule Orion on skis=Light GA
Mooney Acclaim=
Mooney Bravo=Light GA
Bell Boeing V-22=
Piper Cherokee 180=Light GA
Piper J-3 Cub=Light GA
Lockheed Martin Sentinel=
Panavia Tornado=
Tupolev TU-95=
Boeing B-17G=
Lockheed Martin Avatar=

Re: Error in routine AirEffect.ProgramForces???

Posted: Fri Jun 23, 2017 6:21 am
by joebelter
Edit to my reply! I don't know what I was thinking. There are NO forces showing in DCS combat. The joystick flies fine, but no forces except for the centering force. All other forces are silent.
I did use your forcetest software and everything works on the joystick there... is that a good sign or is it my joystick? I just bought it from a good seller...

Let me know.
Joe

Re: Error in routine AirEffect.ProgramForces???

Posted: Fri Jun 23, 2017 7:14 am
by RussDirks
According to the .cfg file you posted, it looks like you're using the X-axis for a trimwheel?? Are you sure that is what you wanted? And you don't have anything programmed for trim up/down via buttons? Please go into Profile Manger / Controller Assignments and review your settings.

Re: Error in routine AirEffect.ProgramForces???

Posted: Fri Jun 23, 2017 9:37 am
by joebelter
I'm using a Thrustmaster Warthog Hotas Throttle for my trim. It has a trim wheel on it for jets.
I went through the Prepar3d settings and deleted ALL the trim buttons, even the keyboard ones.
Also - here's something else. I have to use FSUIPC for my axis. If I don't, everytime I pull back on my stick in pitch (Y axis) I get another input in 'the X axis. Not flyable. Note that I did not program ANY buttons in FSUIPC - just axis.
Does that help?
Did you see that my stick passed the forcetest software? Does that mean the stick is ok?
Joe

Re: Error in routine AirEffect.ProgramForces???

Posted: Fri Jun 23, 2017 10:30 am
by joebelter
Due to trying to do this with half a brain tied behind my back, I DIDN'T have the Prepar3d forces UNCHECKED!
Once I did that, all the forces work great. How cool.
THanks for the OUTSTANDING support.
Joe